NYLON 6 - A HIGH PERFORMANCE MATERIAL
Approved by the Water Supply (Water Quality) regulations 1989 & Water Regulations Advisory Committee of UK for its use in potable water, this material is superior to existing materials being used in terms of strength and ability to withstand heat. The fittings are designed and comply to British Standard BS 5114: 1975
| ||
| ||
MECHANICAL PROPERTIES Hansen fittings, together with high density Polyethylene pipes, provide an unsurpassable potable water system. These sleek fittings are slim enough to be buried in walls and are able to withstand very high pressures. |
Mechanical Properties | Test Conditions | Units | Standards |
Tensile Modulus | 1mm/min | MPa | ISO 527 |
Tensile stress at break | 5mm/min | MPa | ISO 527 |
Tensile strain at break | 5mm/min | MPa | ISO 527 |
Flexural Modulus | 2mm/min | MPa | ISO 178 |
Flexural Strength | 5mm/min | MPa | ISO 178 |
Temperature of Deflection under load method Af | MPa | oC | ISO 75 |
Coefficient of Linear Thermal Expansion | 23 to 55oC | 10-4/K | ASTM E 831 |
Water Absorbtion | Saturation Value in water at 23% | % | ISO 62 |
Density | gm/cm3 | ISO 1183 |
HOW IT WORKS
HOW TO FIT
SITE INSTALLATION |
Here are some examples of where our products are used. It can be industrial areas, housing, factories, everywhere. |
BENEFITS
| ||||||||||||||||||||||||
I am amazed on how you present this wonderful pipe fitting. It is very different from the traditional fittings. This is one of the innovation for the pipe fitting industry. A provider like that for the HDPE fittings in the Philippines is very commendable.
ReplyDelete