Hansen fittings, together with high density Polyethylene (HDPE) pipes, provide an unsurpassable potable water system.

NO 'O'-RINGS, NO CRIMPING, NO SOLVENT CEMENT


NYLON 6 - A HIGH PERFORMANCE MATERIAL
Approved by the Water Supply (Water Quality) regulations 1989 & Water Regulations Advisory Committee of UK for its use in potable water, this material is superior to existing materials being used in terms of strength and ability to withstand heat. The fittings are designed and comply to British Standard BS 5114: 1975

MECHANICAL PROPERTIES Hansen fittings, together with high density Polyethylene pipes, provide an unsurpassable potable water system. These sleek fittings are slim enough to be buried in walls and are able to withstand very high pressures.

Mechanical Properties	Test Conditions	Units	Standards
Tensile Modulus	1mm/min	MPa	ISO 527
Tensile stress at break	5mm/min	MPa	ISO 527
Tensile strain at break	5mm/min	MPa	ISO 527
Flexural Modulus	2mm/min	MPa	ISO 178
Flexural Strength	5mm/min	MPa	ISO 178
Temperature of Deflection under load method Af	MPa	oC	ISO 75
Coefficient of Linear Thermal Expansion	23 to 55oC	10-4/K	ASTM E 831
Water Absorbtion	Saturation Value in water at 23%	%	ISO 62
Density		gm/cm3	ISO 1183

HOW IT WORKS

HOW TO FIT

SITE INSTALLATION

Here are some examples of where our products are used. It can be industrial areas, housing, factories, everywhere.

BENEFITS

Size - Sleek fittings are slim enough to be buried in walls. Time - Fast & Simple installation Effeciency - No "O" ring, No Crimping, No solvent cement. Simple & Hassle free installation, no specialist/ site equipment/ skilled labour. Cost Effective - Savings from tools and workers. Durable - Long life service, leak-free, High performance material-Nylon 6 can withstand heat and high stress applications. Price - Economical Excellent Hydraulic flow characteristics Corrosion and rust resistance Patented System - No 'backyard' manufacturer or imitations Test results from reputed testing bodies - SIRIM, JBA